Enable Paging for Your Grandstream Handset
Review how you can turn on the paging feature for a Grandstream Handset in its Advanced Settings.
By default, paging is disabled on the handsets just in case the handsets should not be playing intercom messages while users walk around with them. If you would like a handset to receive pages from desk phones and other handsets, do the following:
- Press the OK button to access its menu and select Settings or press the Settings softkey.
- In the Settings menu, select Advanced Settings → PTT/Paging.
- In the PTT/Paging menu, select Multicast Paging.
- While hovering over the Multicast Paging option, press the Left or Right navigational key to set it as Enabled.
- Hold down the On-Hook/Power button for a couple of seconds and release to exit all menus.
- If needed, place a test page by holding down the Paging button located under the Volume buttons on the left side of the handset.